Scope get home#
Reads the home position of the probe station scope.
Description#
The test reads the home position of the motorized scope of the connected probe station and stores it as measurement data.
Input parameters#
| Parameter | Description |
|---|---|
| Probe station | The probe station whose scope home position shall be read. |
Output parameters#
| Parameter | Description |
|---|---|
| Home x | The scope home position on the x axis in micrometers. |
| Home y | The scope home position on the y axis in micrometers. |
Supported devices#
All probe stations with a motorized scope, e.g. MPI SENTIO based probe stations
(SENTIO 3.0.2 or later, remote command get_scope_home).
Example#
Select the probe station and run the test to store the current scope home position as measurement data.
See also: Scope set home